![HP Z240 Small Form Factor Workstation](https://support.hp.com/doc-images/126/c04899749.jpg)
Product image
![HP Z240 Small Form Factor Workstation](https://support.hp.com/doc-images/126/c04899749.jpg)
System board
Specification
|
Description
|
System board form factor
|
ATX 24.38 x 24.38 mm (9.6 x 9.6 in)
|
Processor socket
|
Single LGA 1151
|
CPU bus speed
|
DMI
|
Chipset
|
Intel PCH C236
|
Memory expansion slots
|
4 DDR4 memory slots
|
Memory type supported
|
DDR4, UDIMM (unbuffered), ECC and non-ECC
|
Memory modes
|
Non-Interleaved for single channel. Interleaved when both channels are populated.
|
Memory speed supported
|
2133MT/s DDR4
|
Memory protection
|
ECC available on data
|
Maximum memory
|
64 GB
|
Memory configuration
|
4GB, 8GB and 16GB non-ECC/4GB, 8GB and 16GB ECC unbuffered DIMMs are supported. ECC and non-ECC memory DIMMs cannot be mixed on the same system.
|
PCI express connectors
|
1 PCI Express Gen3 slot x 1 mechanical/ x 1 electrical (LP, half length)
1 PCI Express Gen3 slot x 16 mechanical/ x 16 electrical (LP, half length)
1 PCI Express Gen3 slot x 1 mechanical/ x 1 electrical (LP, half length)
1 PCI Express Gen3 slot x 16 mechanical/ x 4 electrical (LP, half length)
NOTE: |
Supported drive interfaces
|
SATA: Integrated (4) Serial ATA interfaces (6 Gb/s SATA). One port can optionally be used for eSATA. RAID 0 and 1 supported. Factory integrated RAID is Microsoft Windows only. RAID 5 is supported by Software XOR.
Serial Attached SCSI: None.
Integrated RAID:
NOTE:
Integrated graphics:
Network Controller: Integrated Ethernet PHY Connection I219LM. Management capabilities: WOL, PXE 2.1 and AMT 9
IDE connector: No
Floppy connector: No
Serial: 1 rear port
2nd Serial: Yes (optional serial port adapter kit required)
Parallel: 1 internal header (optional parallel port adapter required)
HD integrated audio: Yes
|
USB Connectors
|
Front: 2 USB 3.0, 2 USB 2.0
Rear: 6 USB 3.0
Internal: 1 USB 3.0, 2 USB 2.0
|
HD integrated audio
|
Yes
|
Flash ROM
|
Yes
|
Chassis fan header
|
N/A
|
Front control panel/speaker header
|
Yes
|
CMOS battery holder - lithium
|
Yes
|
Integrated trusted platform module
|
Integrated TPM 1.2.
|
Power supply headers
|
Yes
|
Power switch, power LED & hard drive LED header
|
Yes
|
Clear password jumper
|
Yes
|
Keyboard/mouse
|
USB or PS/2
|
Operating voltage range
|
90-264 VAC
|
Rated voltage range
|
100-240 VAC
|
Rated line frequency
|
50-60 Hz
|
Operating line frequency range
|
47-63 Hz
|
Rated input current
|
4A at 100-240 V
|
Heat dissipation
|
Typical: 444 btu/hr (112 kcal/hr)
Maximum: 890 btu/hr (224 kcal/hr)
|
Power supply fan
|
70 mm x 70 mm x 25 mm 4-wire PWM
|
ENERGY STAR qualified (config dependent)
|
Yes
|
FEMP standby power compliant
|
Yes, with wake-on-LAN disabled: <2W in 55 - Power Off
|
Surge tolerant full ranging power supply (withstands power surges up to 2000 V)
|
Yes
|
Hood lock header
|
Yes
|
DrP Lot 6- Tier 2 Compliance at 230 V
|
Yes
|
Environmental requirements
|
Temperature:
Operating: 5° to 35° C (40° to 95° F)
Non-operating: -40° to 60° C (-40° to 140° F)
Maximum altitude
Operating: 3,000 m (10,000 ft)
Non-operating: 9,100 m (30,000 ft)
Humidity:
Operating: 8% to 85% RH (non-condensing)
Non-operating: 8% to 90%
Shock
Operating: 40 g, 2-3 ms, half-sine
Non-operating: 160 cm/s, 2-3 ms, (~100g) Square: 422 cm/s, 20 g
|
Cooling
|
Above 1524 m (5,000 ft) altitude, maximum operating temperature is de-rated by 1° C (1.8° F) per 305 m (1000 ft) elevation increase.
|
Physical security and serviceability
Specification
|
Description
|
Access panel
|
Tool-less
Includes system board and memory information
|
Hard drives
|
Tool-less (internal bays)
|
Expansion cards
|
Tool-less
|
Processor socket
|
Tool-less, except for the processor heatsink
|
Green user touch points
|
Yes, on tool-less internal chassis mechanisms
|
Color-coordinated cables and connectors
|
Yes
|
Memory
|
Tool-less
|
System board
|
Screw-in
|
Dual color power and HD LED on front of computer
|
Yes.
|
Configuration record SW
|
Yes
|
Over-temp warning on screen
|
Yes
|
Restore CD/DVD set
|
Consists of an operating system DVD (OSDVD) and a driver DVD (DRDVD). OSDVD restores the original operating system. DRDVD will provide all drivers for the system. The DRDVD may also contain applications that originally shipped with the system for optional installation. Applications can also be obtained from HP.com. OSDVD and DRDVD are orderable with the system and available from HP Support.
|
Dual function front power switch
|
Yes, causes a fail-safe power off when held for 4 seconds
|
Padlock support
|
Yes (optional): Locks side cover and secures chassis from theft
0.22 in diameter padlock loop at rear of system
|
Cable lock support
|
Yes, Kensington Cable Lock (optional): Locks side cover and secures chassis from theft 3 x 7 mm slot at rear of system
|
Universal chassis clamp lock support
|
Yes (optional): Locks side cover and locks cables to chassis. Secures chassis from theft and allows multiple units to be chained together when used with optional cable Threaded feature at rear of system
|
Solenoid lock and hood sensor
|
Yes (optional)
The Solenoid Hood Lock eliminates the need for a physical key by making the chassis lockable through software and a password. You can also lock and unlock the chassis remotely over the network. The Sensor Kit detects when the access panel has been removed.
|
Rear port control cover
|
Yes, locks rear IO cables to prevent cable theft
|
Serial, parallel, USB, audio, network, enable/disable port control
|
Yes, enables or disables serial, USB, audio, and network ports
|
Removable media write/boot control
|
Yes, prevents ability to boot from removable media on supported devices (and can disable writes to media)
|
Power-on password
|
Yes, prevents an unauthorized person from booting up the workstation
|
Setup password
|
Yes, prevents an unauthorized person from changing the workstation configuration
|
NIC LEDs (integrated) (Green & Amber)
|
Yes
|
3.3V aux power LED on system PCA
|
No
|
CPUs and heatsinks
|
A T-15 Torx or flat blade screwdriver is needed to remove the CPU heatsink before the CPU can be removed. CPU removal is tool-less
|
Power Supply Diagnostic LED
|
No
|
Front power LED
|
Yes, white (normal), red (fault)
|
Front hard drive activity LED
|
Yes, white
|
Front ODD activity LED
|
Yes
|
Internal speaker
|
Yes
|
System/emergency ROM flash recovery
|
Recovers corrupted system BIOS
|
Cooling solutions
|
Air cooled forced convection
|
Power supply fans
|
70 x 70 x 25 mm (2.75 x 2.75 x 0.98 in)4-wire PWM (non-serviceable)
|
CPU heatsink fan
|
Mainstream (<=65W): 93 x 86 x 75.8 mm (3.66 x 3.38 x 2.98 in)
Performance: (<=95W): 93 x 102.7 x 75.8 mm (3.66 x 4.04 x 2.98 in)
|
Chassis fan
|
CPU heatsink fan also operates as the chassis fan.
|
Memory heatsink fan
|
No
|
HP PC Hardware Diagnostics UEFI
|
HP PC Hardware Diagnostics (UEFI) enables hardware level testing outside the operating system on many components. The diagnostics can be invoked by pressing F2 at POST, and is available as a download from HP Support.
|
Access panel key lock
|
No
|
ACPI-ready hardware
|
Advanced Configuration and Power Management Interface (ACPI). Allows the system to wake from a low power mode and controls system power consumption, making it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system
|
Trusted platform module chip
|
Yes
|
Integrated chassis handles
|
No
|
Power supply
|
Requires T15 Torx or flat blade screwdriver
|
PCI card retention
|
Yes, rear (all), middle (none), front (none)
|
CMOS battery holder
|
Yes
|
DIMM connectors
|
Yes
|
Flash ROM
|
Yes
|
Diagnostic power switch LED on board
|
Yes
|
Clear password jumper
|
Yes
|
Clear CMOS button
|
Yes
|
BIOS
Specification
|
Description
|
BIOS 32-bit services
|
Standard BIOS 32-bit Service Directory Proposal v0.4
|
PCI 3.0 support
|
Full BIOS support for PCI Express through industry standard interfaces..
|
ATAPI
|
ATAPI Removable Media Device BIOS Specification Version 1.0.
|
BBS
|
BIOS Boot Specification v1.01.
Provides more control over how and from what devices the workstation will boot.
|
WMI support
|
WMI is Microsoft's implementation of Web-Based Enterprise Management (WBEM) for Windows. WMI is fully compliant with the Distributed Management Task Force (DMTF) Common Information Model (CIM) and WBEM specifications.
|
BIOS power on
|
Users can define a specific day-of-week and time for the system to power on.
|
ROM Based Computer Setup Utility (F10)
|
Review and customize system configuration settings controlled by the BIOS
|
System/emergency ROM flash recovery with video
|
Recovers system BIOS in corrupted Flash ROM
|
Replicated setup
|
Saves BIOS settings to USB flash device in human readable file. Repset.exe utility can then replicate these settings on machines being deployed without entering Computer Configuration Utility (F10 Setup)
|
SMBIOS
|
System Management BIOS 2.7.1, for system management information
|
Boot control
|
Disables the ability to boot from removable media on supported devices
|
Memory change alert
|
Alerts management console if memory is removed or changed
|
Thermal alert
|
Monitors the temperature state within the chassis.
Three modes:
|
Remote ROM flash
|
Provides secure, fail-safe ROM image management from a central network console.
Updates can be performed before starting the OS. Updates can be periodically scheduled.
|
ACPI (Advanced Configuration and Power Management Interface)
|
Allows the system to enter and resume from low power modes (sleep states). Enables an operating system to control system power consumption based on the dynamic workload.
Makes it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system. Supports ACPI 4.0 for full compatibility with 64-bit operating systems.
|
Ownership Tag
|
A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen.
|
Remote Wakeup/Remote Shutdown
|
System administrators can power on, restart, and power off a client computer
|
ASF 2.0 Compliant
|
No
|
Instantly Available PC (Suspend to RAM - ACPI sleep state S3)
|
Allows for very low power consumption with quick resume time
|
Remote System Installation via F12 (PXE 2.1) (Remote Boot from Server)
|
Allows a new or existing system to boot over the network and download software, including the operating system
|
ROM revision levels
|
Reports the system BIOS revision level in Computer Configuration Utility (F10 Setup). Version is available through an industry standard interface (SMBIOS) so that management SW applications can use and report this information
|
System board revision level
|
Allows management SW to read revision level of the system board. Revision level is digitally encoded into the HW and cannot be modified
|
Start-up Diagnostics (Power-on Self-Test)
|
Assesses system health at boot time with selectable levels of testing.
|
Auto Setup when new hardware installed
|
System automatically detects addition of new hardware.
|
Keyboard-less Operation
|
The system can be booted without a keyboard.
|
Localized ROM Setup
|
Common BIOS image supports System Configuration Utility (F10 Setup) menus in 12 languages with local keyboard mappings.
|
Asset Tag
|
The user or IT administrator to set a unique tag string in non-volatile memory.
|
Per-slot Control
|
Allows I/O slot parameters (option ROM enable/disable) to be configured individually.
|
Adaptive cooling
|
Control parameters are set according to detected hardware configuration for optimal acoustics.
|
Pre-boot diagnostics
|
(Pre-video) critical errors are reported via beeps and blinks on the power LED.
|
Intel Active Management Technology (AMT)
|
AMT 11.0; Allows workstation status to be monitored on a remote console
|
Digitally and Cryptographically Signed BIOS
|
Helps to prevent the installation of unauthorized versions of a BIOS (a rogue BIOS) from a virus, malware, or other code that could lead to compromised system security, data access, physical service, or even system board replacement.
|
Master Boot Record Protection
|
A feature in the HP BIOS that prevents changes and/or infections to the Master Boot Record. Useful in protecting from viruses.
|
Boot Block Emergency Recovery Mode (BIOS Recovery)
|
The HP BIOS offers a write-protected boot block ROM that provides recovery from a failed flashing of the computer BIOS. This special recovery mode prevents the system from becoming unusable or “bricked” when a BIOS update is interrupted.
|
Industry Standard
|
Revision Supported by the BIOS
|
UEFI specification revision
|
UEFI 2.4.0
|
ACPI
|
Advanced Configuration and Power Management Interface, Version 4.0
|
ASF
|
Alert Standard Format Specification, Version 2.0
|
ATA (IDE)
|
AT Attachment 6 with Packet Interface (ATA/ATAPI-6), Revision 3b
|
CD Boot
|
''El Torito'' Bootable CD-ROM Format Specification Version 1.0
|
EDD
|
Enhanced Disk Drive Specification Version 1.1
BIOS Enhanced Disk Drive Specification Version 3.0
|
PCI Express
|
PCI Express Base Specification, Revision 2.0
PCI Express Base Specification, Revision 3.0.
|
PMM
|
POST Memory Manager Specification, Version 1.01
Serial ATA II: Extensions to Serial ATA 1.0, Revision 1.0a
Serial ATA II Cables and Connectors Volume 2 Gold
SATA-IO SATA Revision 3.0 Specification
|
SATA
|
Serial ATA Specification, Revision 1.0a
|
SPD
|
PC SDRAM Serial Presence Detect (SPD) Specification, Revision 1.2B
|
TPM
|
Trusted Computing Group TPM Specification Version 1.2 (TPM 2.0 via Firmware Update)
|
USB
|
Universal Serial Bus Revision 1.1 Specification
Universal Serial Bus Revision 2.0 Specification
Universal Serial Bus Revision 3.0 Specification
|
Manageability
Specification
|
Description
|
Intel Active Management Technology (AMT)
|
An advanced set of remote management features and functionality which provides network administrators the latest and most effective tools to remotely discover, heal, and protect networked client systems regardless of the system's health or power state. AMT 11.0 includes the following advanced management functions:
|
Intel vPro technology
|
The HP Z240 workstations support Intel vPro technology when purchased with a vPro technology capable CPU: Intel Xeon processor family or 6th Generation Intel Core i5/i7 processors with Intel VT-d/VT-x and Intel TXT technology
|
Service, support, and warranty
|
|
Processors
Specification
|
Description
|
Processors
|
Intel CoreTM i7-6700 3.4 2133 4C CPU
Intel CoreTM i7-6600 3.3 2133 4C CPU
Intel CoreTM i7-6500 3.2 2133 4C CPU
|
Storage/hard drives
PCIe SSDs for HP workstations
Graphics
Optical and removable storage
Networking and communications
Supported drive interfaces
Specification
|
Description
|
SATA
|
Integrated (5) Serial ATA interfaces (6 Gb/s SATA). One port can optionally be used for eSATA.
RAID 0 and 1 supported. Factory integrated RAID is Microsoft Windows only.
|
Integrated graphics
|
Intel HD Graphics 530 (on Core i3/i5/i7-6xxx processors)
Intel Integrated Graphics for Xeon E3 processors
Based on Unified Memory Architecture (UMA) - A region of system memory is reserved and dedicated to the graphics display.
Support for Microsoft DirectX 11, OpenGL 4.0 and OpenCL 1.2 on Intel HD Graphics P530;.
Supports up to three simultaneous displays across DP outputs.
Max. resolution supported: 3840 x 2160 at 60Hz
|
Network controller
|
Integrated Ethernet PHY Connection I217LM. Management capabilities: WOL, PXE 2.1 and AMT 11.0
|
Physical specifications
Feature
|
Description
|
Dimensions (W x H x D)
|
100 x 338 x 381 mm (3.95 x 13.3 x 15 in)
|
Social and environmental
Specification
|
Description
|
Eco-Label Certifications and Declarations
|
This product is low halogen except for power cords, cables and peripherals. Service parts obtained after purchase may not be Low Halogen.
|
Batteries
|
The battery in this product complies with EU Directive 2006/66/EC
Battery size: CR2032 (coin cell)
Battery type: Lithium Metal
The battery in this product does not contain:
|
Restricted material usage
|
Restricted Material Usage This product meets the material restrictions specified in HP's General Specification for the Environment. HP is committed to compliance with all applicable environmental laws and regulations, including the European Union Restriction of Hazardous Substances (RoHS) Directive. HP's goal is to exceed compliance obligations by meeting the requirements of the RoHS Directive on a worldwide basis.
|
Low halogen statement
|
This product is low halogen except for power cords, cables and peripherals, as well as the following customer-configurable internal components: Creative Recon3D PCIe Audio Card is not Low Halogen. Service parts obtained after purchase may not be Low Halogen.
|
End-of-Life management and recycling
|
HP offers end-of-life HP product return and recycling programs in many geographic areas. To recycle your product, please go to: http://www.hp.com/recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. This product is greater than 90% recyclable by weight when properly disposed of at end of life.
|
Additional information
|
This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive - 2002/96/EC.
Plastic parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043.
This product is >90% recycle-able when properly disposed of at end of life
EPEAT Gold registered in the U.S. EPEAT registration varies by country.
|
Packaging
|
HP Workstation product packaging meets the HP General Specification
|
Internal
|
Cushions made from fabricated recycled expanded-polyethylene (EPE) or recycled expanded-polypropylene (EPP). May also be made from recycled molded paper-pulp (MPP).
|
External
|
Carton made from corrugated fiberboard with at least 25% recycled content.
|
Inquiry - HP Z240sFF